DAQ Dictionary – A

You are here

17 November

DAQ Dictionary – A


In this new series, we’re going to go through the alphabet of data acquisition and try to closely explain the terms used in the field. The articles with new terms will be published twice a week, so make sure you don’t miss any of them if you want to learn the “language” of data acquisition. First things first, we start with A.

Absolute Accuracy

How close the measured value is to the real value. 

Acquisition Time

Also known as Sample and Hold Acquisition Time, this term is for the time taken for the sampling circuit to settle to the input voltage. 

A/D, A-D, ADC, Analogue-to-Digital Converter

Changes an analog signal into a digital signal appropriate for input to a computer. 

Alternating Current (AC)

Electric current whose flow alternates the direction. The number of times the direction changes in one second is called the frequency. The usual waveform of AC is sinusoidal.


A representation of a high-frequency waveform that has been sampled at a very low rate. Take a look at  anti-alias filter for further understanding.

Ampere (A)

SI unit of electric current.


A circuit that creates a greater output power, voltage or current than was applied at the input.


The size of a signal.

Analogue-to-Digital (A-D) Converter

Changes an analog signal to a digital signal suitable for input to a computer. 

Analogue Input

A substantially flexible signal going into a data acquisition device. This is usually a voltage signal. In this case, the data acquisition device will convert the current to a voltage before accepting it.

Analogue Output

A control signal produced by the data acquisition and control equipment. 

Anti-Alias Filter

An anti-alias filter that allows passing through the lower occurrence components of a signal but not higher frequencies signals from introducing distortion. Anti-alias filters are indicated agreeing to the sampling rate of the system and there must be one filter per input signal. 


Input parameter to a program.


American Standard Code for Information Interchange. 

We’re done with the terms from daq starting with A, the following article will be on B-C. Stay tuned and follow the whole series!


Latest From Blog

Semiconductor Testing
12 December 2017 | 0 comments

Automated test equipment (ATE) is computer-controlled test and measurement equipment that allows for testing with minimal human interaction. The tested devices are referred to as a device under test (DUT).

[Read more]


“ReadyDAQ provides a customizable LabVIEW solution which is both time saving and affordable”. 


The team – ReadyDAQ has a dedicated team of physicists, electrical engineers, and programmers who work to provide a data acquisition solution for any project in different difficulty levels.


  • Address: Matam - Scientific Industrial park, Building 23      Haifa, Israel
  • Phone: +972 72 250 5555
  • Mail: info@ReadyDAQ.com