Do You Need a Data Acquisition System?

You are here

27 July
0
  0

Do You Need a Data Acquisition System?

Whether you need some physical conditions measured, and the sampling be converted into digital values and brought to a computer screen, the answer is: yes, you do need a data acquisition system. There is always the old-fashioned way, to measure these physical conditions and write them all down onto a piece of paper, then scan this raw data or place it into an excel table, but that way is nowadays obsolete and extremely inefficient. You need to assign one extremely meticulous employee to do this work, and have to reread through whole stacks of paper to find that one piece of information you need. Instead, when a new prototype is being under development, or you are only starting the whole project itself, as much brainpower as possible should be addressed to problem-solving, and developing the prototype itself, not to acquiring heaps of measurement data. This whole job of automating your data acquisition can be left to machines and data logging software, while you are bringing your prototype from your mind into this world.

    This is where ReadyDAQ can prove to be of utmost assistance. Our software and our data acquisition devices, which are all fully operational under National Instruments hardware, are able to assist you on your next breakthrough. Whether your prototype is only at the beginning of its journey, or your products require more development to enter the next phase, we have you covered. The efficiency of your team improves drastically when you opt to use our equipment, there is little to almost no time being spent on compiling raw data, and best of all this whole process can be done automatically, almost at the press of a button. Our automation and data acquisition systems can help you develop solutions faster, become more efficient, and can support your research take less time and resources than without our systems.

    Moreover, we have recently gained a National Instrument Alliance partnership certificate. What does that mean for our customers? Well, this certificate ensures the success of the project at hand, and gives an option to integrate complex projects into automation and data acquisition (daq) systems. Furthermore, it ensures risk mitigation – you, our customer, is able to use National Instrument tools more effectively, with project development in mind. Also, our customers are open to the option of getting local support to help with carrying out one part of the project or, if the customer wants to, managing the whole process. Ultimately, our customers can be confident in developing solutions regarding their project faster, and with in-depth expertise.

    As the world needs further development, engineers, scientists and constructors need support in their work. ReadyDAQ provides the necessary support of daq software, and exercises a great impact on the reduction of costs and required time to get the project up and running. The best thing? You can try it for yourself, free of charge!

 

Latest From Blog

Semiconductor Testing
12 December 2017 | 0 comments

Automated test equipment (ATE) is computer-controlled test and measurement equipment that allows for testing with minimal human interaction. The tested devices are referred to as a device under test (DUT).

[Read more]
SUBSCRIBE TO OUR NEWSLETTER

About

“ReadyDAQ provides a customizable LabVIEW solution which is both time saving and affordable”. 

 

The team – ReadyDAQ has a dedicated team of physicists, electrical engineers, and programmers who work to provide a data acquisition solution for any project in different difficulty levels.

CONTACT INFO

  • Address: Matam - Scientific Industrial park, Building 23      Haifa, Israel
  • Phone: +972 72 250 5555
  • Mail: info@ReadyDAQ.com