fbpx

DAQ “SYSTEM” CONSIDERATIONS

DAQ “SYSTEM” CONSIDERATIONS

Be mindful so as to analyze the analog input systems you are thinking about to decide whether the specimen rate determination gave is to each channel or for the whole board. As talked about already, most DAQ input sheets utilize a multi-channel multiplexer associated with a solitary A/D converter. Most “item” depictions (e.g., 100-kilo samples/second, 8-channel, A/D board), indicate the aggregate specimen rate of the board or gadget. This permits examining of one channel at 100 kS/s, yet in the event that more channels are required, the 100 kS/s is shared among all channels. For instance, if two channels are examined, each may just be inspected at 50 kS/s each. So also, 5 channels could be tested at 20 kS/s each. In the event that the particular does not indicate the specimen rate “according to channel”, it is likely the example rate must be separated among all channels inspected. Another example rate element ought to be considered when different input signals contain generally changing recurrence content. For instance, a car test system may need to screen vibration at 20 kS/s and temperature at 1 S/s. In the event that the analog input just examples at a solitary rate, the system will be compelled to test temperature at 20 kS/s and will squander a lot of memory/plate space with the 19,999 temperature S/s that aren’t required.

The last testing rate concern is the need to test sufficiently quick or give separating to anticipate associating. On the off chance that signals incorporated into the input signal contain frequencies higher than the example rate, there is the danger of associating errors. Without going into the arithmetic of associating, we will simply say that these higher recurrence signals can and will show themselves as a low recurrence error.

A genuine case of associating is basic in motion pictures. The cutting edges of a helicopter/plane or the spokes of a wheel having all the earmarks of being moving gradually or potentially in reverse is a case of associating. In the motion pictures it doesn’t make a difference, yet in the event that a similar wonder shows up in the deliberate input signal, it’s an unadulterated and some of the time basic error. 

There are truly two answers for associating. The to start with, and regularly least difficult, is to test at a rate higher than the most noteworthy recurrence segment in the signal measured. Some estimation idealists will state that you can never make certain what the most elevated recurrence in a signal will be, however in actuality many, if not most, systems originators have great from the earlier learning of the frequencies incorporated into a given input signal. Individuals don’t utilize hostile to associating channels on thermocouples since they are never required. With a smart thought of the nuts and bolts of the signals measured, it is normally a clear choice to decide whether associating may or won’t be an issue. In a few applications, for example, sound and vibration examination, associating is an undeniable concern and it is hard to ensure that a specimen rate is speedier than each recurrence part in the waveform. These applications require an against associating channel. These channels are commonly 4-shaft or more noteworthy channels set at one a large portion of the specimen rate. They keep the higher recurrence signals from getting to the system A/D converter, where they can make associating errors

Share this post

Share on facebook
Share on google
Share on linkedin
Share on twitter

Latest From Blog

Semiconductor Testing

Automated test equipment (ATE) is a computer-controlled test and measurement equipment that allows for testing with minimal human interaction. The tested devices are referred to

Read More »

Subscribe to our newsletter​

Skip to content